InsightsVerification and trust
What a supplier's certificate tells you, and what it doesn't
An ISO 9001 or IATF 16949 certificate is a useful signal, but only if you read the parts most buyers skip: scope, sites, validity and who issued it.
Verification and trust 7 min read
Key takeaways
- Read the scope statement: it defines what is actually certified.
- Check which sites are covered; multi-site certificates are common.
- Confirm the certificate is current and issued by an accredited body.
- A certificate shows a management system exists, not that a specific part will be right.
Supplier certificates are among the most requested and least read documents in procurement. A PDF arrives, someone checks that the logo says ISO 9001, and it goes in a folder. That habit misses most of what the certificate can tell you, and sometimes the one detail that matters.
Here is how to read one properly in a few minutes, and where its value ends.
Start with the scope statement
Every management system certificate has a scope: a sentence or paragraph describing the activities covered by the audit and the certificate. It is the most important line on the page and the one most often ignored.
A scope such as “design and manufacture of aluminium die-cast components” tells you something very different from “distribution of industrial components”. If the process you are buying is not in the scope, the certificate says nothing about how that process is controlled.
A common gap
A supplier may be certified for machining but subcontract the casting. The certificate is genuine and current, yet it does not cover the process that carries most of your risk.
Check which sites are covered
Many organisations hold a single certificate covering several sites, often listed in an appendix. The site that will actually make your part should be on that list. A certificate for a group headquarters does not automatically extend to every factory the group owns.
Confirm it is current
Quality management system certificates are typically issued on a three-year cycle, with surveillance audits in between. Look at the issue and expiry dates, and remember that a certificate can be suspended or withdrawn before it expires. A PDF in your folder doesn't change when that happens.
- Note the expiry date and set a reminder before it.
- If the certificate is close to expiry, ask whether the recertification audit has taken place.
- Where it matters, ask the certification body to confirm the current status directly.
Look at who issued it
A certificate is only as credible as the body that issued it. Credible certification bodies are themselves accredited by a national accreditation body, and the certificate usually carries that accreditation mark. For ISO management system certificates, the IAF CertSearch database can help confirm accredited certificates where the certification body participates.
Sector schemes add their own controls. IATF 16949 certificates can only be issued by certification bodies recognised by the IATF, and aerospace AS9100 certification is recorded through the IAQG's OASIS database. If a certificate claims a sector standard, the issuer should be one recognised for it.
| Check | Where to look | What a problem looks like |
|---|---|---|
| Scope | The scope statement | Your process isn't mentioned |
| Sites | Site list or appendix | Your production site isn't listed |
| Validity | Issue and expiry dates | Expired, or close to expiry with no recertification |
| Issuer | Certification body and accreditation mark | No accreditation, or a body not recognised for the sector scheme |
| Standard version | Standard and edition | A superseded edition |
What a certificate does not prove
Even a perfectly valid certificate has limits. It shows that an organisation operates a management system that met the standard at audit. It does not tell you:
- whether a specific part will meet your drawing
- how much capacity is available for your volume
- whether special processes such as heat treatment or plating are approved for your sector
- how the supplier performs on delivery and quality day to day
“A certificate tells you a system exists. Only evidence about your part tells you it works for you.”
Those questions are answered by technical review, samples, approval processes and, over time, performance data. A certificate earns a supplier a place on the shortlist; it doesn't replace the rest of qualification.
In short
Five-minute certificate check
- Scope covers the process you are buying
- Your production site is covered
- Current, with recertification on track
- Issued by an accredited body, recognised for any sector scheme claimed
- Current edition of the standard